about the Voxx Replica Hellcat

The Vöxx Replica Hellcat features seven main spokes that divide as they approach the outer rim, creating 14 outer spoke branches. Each spoke uses a smooth, sculpted profile with rounded transitions near the five-lug center section and narrower extensions toward the perimeter. This split seven-spoke layout gives the wheel a detailed performance-inspired appearance without creating an overly dense mesh pattern.

Large openings between the seven primary spokes keep the face open, while the divided outer sections add detail and depth around the rim. The spokes extend close to the outer edge, creating a full-face profile rather than a traditional deep-dish design. The wider 20x11 version provides a deeper and more aggressive appearance than the standard-width configurations.

We offer the Hellcat in 20x9, 20x10.5, 20x11, and 22x9 sizes. The 20x9 uses a +20mm offset, while the wider 20x10.5 uses a +25mm offset and is intended for compatible rear fitments. The 20x11 uses a -3mm offset for select widebody applications, while the 22x9 uses a +20mm offset. Every configuration uses a 5x115 bolt pattern and a 71.6mm center bore.

These available sizes allow the Hellcat to support square, staggered, and widebody setups on compatible vehicles. The 20x9 can be used at all four corners for a square arrangement, while the 20x9 front and 20x10.5 rear combination creates a staggered setup. The low-offset 20x11 version provides the additional width and outward wheel position required by select compatible widebody configurations.

The Hellcat is offered in Gloss Black, Matte Black, and Matte Bronze, with availability varying by size. Gloss Black is available in 20x9 and 20x10.5. Matte Black is offered in 20x9, 20x10.5, 20x11, and 22x9. Matte Bronze is available exclusively in the wide 20x11 configuration. The 22x9 Matte Black version uses a +20mm offset and carries a 1,521-pound load rating.

Designed for select Challenger, Charger, and Chrysler applications, the Hellcat delivers a factory-inspired appearance with several sizing options for different vehicle widths and tire setups. Exact compatibility depends on the vehicle’s year, trim, drivetrain, brake package, suspension, body configuration, and selected tire size.

The Hellcat includes a Vöxx center cap and can also accept compatible Dodge OEM center cap part 0489-5900-AAA, allowing owners to retain a factory-style center appearance when desired.